#7712   2” F Base Channel

2” base channel designed to anchor wall panels and extruded vertical members to foundation.

Lengths:  24''   Colors: White, Almond, Bronze

#7713   2” Sloped Base Channel

2” base channel designed to anchor wall panels and extruded vertical members to foundation. Sloped channel diverts any moisture intrusion to weep out before it can enter occupied space.

Lengths:  24''   Colors: White, Almond, Bronze, & Clay

#7714  2” Cabana Base Channel

2” base channel designed to anchor wall panels and extruded vertical members to foundation. Can also be used as a top cap.

Lengths:  24''   Colors: White, Almond, Bronze

#7719  2” Corner Channel - 90°

2” corner channel designed for vertical support and used to connect fill panels or wall sections at 90º corners.

Lengths:  10', 20'   Colors: White

#7719A  2” Corner Channel - 22.5°

2” corner channel designed for vertical support and used to connect fill panels or wall sections at 22.5º corners.

Lengths:  24'   Colors: White

#7719B  2” Corner Channel - 45°

2” corner channel designed for vertical support and used to connect fill panels or wall sections at 45º corners.

Lengths:  24'    Colors: White

#7715  2” Flat Top Cap

Finishes sides of roof and caps ends of gutter.  Project 2½” above the roof to direct water into the front gutter.

Lengths:  24''   Colors: White, Almond, Bronze

#7751  2” 3/12 Sloped Top Cap

2” top cap designed to cap the wall system and connect the roof to the walls at a 3/12 slope.

Lengths:  24''   Colors: White, Almond, Bronze

#7715A  2” Adjustable Top Cap

2” adjustable top cap designed to cap the eave walls of a gable room to adjust to various slopes. Adjustable from flat to 30º maximum.

Lengths:  24'   Colors: White, Almond

#7718  2” F Wall Cap Channel

2” F-channel wall cap designed to cap wall system and connect roof to walls. Typically used when installing walls under an existing roof.

Lengths:  24''   Colors: White, Almond, Bronze, & Clay

#7716  2” Receiving Channel

2” receiving channel used as a starter channel at the host structure. 2” panel fits inside.

Lengths:  24'   Colors: White, Almond, Bronze, & Clay

#7717  2” 2pc Infill Channel

2” 2 piece receiving channel designed to be used a starter channel to install wall sections and infill panels within a trapped area. Used when installing walls in between existing posts and under existing roofs.

Lengths:  24''   Colors: White, Almond, Bronze, & Clay

#77102  2” Self-Mating Channel

Designed as a vertical support used to join wall sections together. May also be used as a raceway for electrical and will accommodate outlet and switch boxes. (UL Listed)

Lengths:  24'   Colors: White, Almond, Bronze

#77103  2” Male Column Channel

Designed as a vertical support used to join wall sections together. Used in conjunction with #77104 Female Column Channel.

Lengths:  24''   Colors: White, Almond, Bronze, & Clay

#77104  2” Female Column Channel

Designed as a vertical support used to join wall sections together. Used in conjunction with #77103 Male Column Channel.

Lengths:  24'   Colors: White, Almond, Bronze & Clay

#77105  2” Panel Adapter Channel

2” panel adapter slides into grooves on male and female column channels and adapts to 2” insulated panels at knee wall and transom locations.

Lengths:  24''   Colors: White, Almond, Bronze, & Clay

#77107  1 5/16”x2” Extruded Column Insert

Used as a column connector between wall sections to achieve greater wall heights or as structural support for the installation of doors.

Lengths:  24'   Colors: Mill Finish

#77122  2” Channel w/ Screen Spline Groove

2” channel designed to be used when screen only is desired. Used as a vertical support as well as for joining wall sections together.

Lengths:  24''   Colors: White, Almond, Bronze, & Clay

#75-60601  Elite 2” H Channel

2” H channel can be used as a vertical support on both sides of windows and doors. It is also used as a connection between solid wall panels.

Lengths:  24''   Colors: White, Almond, Bronze, & Clay

#7716A  2” DRC Channel

2” D.R.C. channel fits into and fills out the open area of a 2” H channel to provide a finished opening for windows or doors.

Lengths:  24''   Colors: White, Almond, Bronze

#7700  2” Stucco Embossed Aluminum Panel

2” thick insulated wall panel. Used in 2” wall systems and is also used to build “end wings” for insulated patio roofs. Aluminum stucco finish.  Custom Lengths available.

Stock Sizes:  4' x 8',  4' x 10'

Colors: White, Almond, Bronze, Clay, Ivory

#7700CDR   2” Cedar Embossed Aluminum Panel

2” thick insulated wall panel. Used in 2” wall systems and is also used to build “end wings” for insulated patio roofs. Aluminum cedar wood grain embossed finish.  Custom Lengths available.

Stock Sizes:  4' x 8',  4' x 10'

Colors: White, Almond, Bronze, Clay, Ivory

#7700D   2” Durashield Panel

2” thick insulated wall panel. Used in 2” wall systems and is also used to build “end wings” for insulated patio roofs. Laminated with durashield on both sides.  Custom Lengths available.

Stock Sizes:  4' x 8',  4' x 10'

Colors: White, Almond, Bronze, Clay, Ivory

#7700DA   2” Durashield/Aluminum Panel

2” thick insulated wall panel. Used in 2” wall systems and is also used to build “end wings” for insulated patio roofs. Panel is laminated with stucco aluminum on one side and durashield on the other.  Custom Lengths available.

Stock Sizes:  4' x 8',  4' x 10'

Colors: White, Almond, Bronze, Clay, Ivory